(F)ile (C)onverter : 
from > command.com --- to > command.msg


MZt you sure (Y/N)?$Windows 95 OPK3. [Version 4.10.1053]!Volume in drive %1 has no label
Volume in drive %1 is %2
Volume Serial Number is %1-%2
Invalid directory
Unable to create directory
6Invalid path, not directory,
or directory not empty
Must specify ON or OFF
Directory of %1
        No Path
Invalid drive in search path
Invalid device
FOR cannot be nested
%Intermediate file error during pipe
&Cannot do binary reads from a device

BREAK is %1
VERIFY is %1
ECHO is %1
LFNFOR is %1
offnnn   Specifies a code page number.

Type CHCP without a parameter to display the active code page number.
[Displays the name of or changes the current directory.

CHDIR [drive:][path]
bCD [drive:][path]

  ..   Specifies that you want to change to the parent directory.

Type CD drive: to display the current directory in the specified drive.
Type CD without parameters to display the current drive and directory.
Clears the screen.

Copies one or more files to another location.

COPY [/A | /B] source [/A | /B] [+ source [/A | /B] [+ ...]] [destination
  [/A | /B]] [/V] [/Y | /-Y]

h  source       Specifies the file or files to be copied.
  /A           Indicates an ASCII text file.
v  /B           Indicates a binary file.
  destination  Specifies the directory and/or filename for the new file(s).
?  /V           Verifies that new files are written correctly.
t  /Y           Suppresses prompting to confirm you want to overwrite an
               existing destination file.
r  /-Y          Causes prompting to confirm you want to overwrite an
               existing destination file.

yThe switch /Y may be preset in the COPYCMD environment variable.
This may be overridden with /-Y on the command line

To append files, specify a single file for destination, but multiple files
for source (using wildcards or file1+file2+file3 format).
Changes the terminal device used to control your system.

CTTY device

  device   The terminal device you want to use, such as COM1.
-Displays or sets the date.

DATE [date]

Type DATE without parameters to display the current date setting and
a prompt for a new one.  Press ENTER to keep the same date.
dDeletes one or more files.

DEL [drive:][path]filename [/P]
ERASE [drive:][path]filename [/P]

  [drive:][path]filename  Specifies the file(s) to delete.  Specify multiple
                          files by using wildcards.
;  /P                Prompts for confirmation before deleting each file.
Displays a list of files and subdirectories in a directory.

DIR [drive:][path][filename] [/P] [/W] [/A[[:]attributes]]
  [/O[[:]sortorder]] [/S] [/B] [/L] [/V]

              Specifies drive, directory, and/or files to list.
              (Could be enhanced file specification or multiple filespecs.)
a  /P          Pauses after each screenful of information.
  /W          Uses wide list format.
z  /A          Displays files with specified attributes.
  attributes   D  Directories                R  Read-only files
               H  Hidden files               A  Files ready for archiving
               S  System files               -  Prefix meaning not
  /O          List by files in sorted order.
  sortorder    N  By name (alphabetic)       S  By size (smallest first)
               E  By extension (alphabetic)  D  By date & time (earliest first)
               G  Group directories first    -  Prefix to reverse order
               A  By Last Access Date (earliest first)
  /S          Displays files in specified directory and all subdirectories.
  /B          Uses bare format (no heading information or summary).
  /L          Uses lowercase.
  /V          Verbose mode.

Switches may be preset in the DIRCMD environment variable.  Override
preset switches by prefixing any switch with - (hyphen)--for example, /-W.
>Quits the COMMAND.COM program (command interpreter).

=Creates a directory.

MKDIR [drive:]path
MD [drive:]path
]Displays or sets a search path for executable files.

PATH [[drive:]path[;...]]

lType PATH ; to clear all search-path settings and direct Windows to search
only in the current directory.
;Type PATH without parameters to display the current path.
8Changes the Windows command prompt.

PROMPT [text]

|  text    Specifies a new command prompt.

Prompt can be made up of normal characters and the following special codes:

/  $Q   = (equal sign)
  $$   $ (dollar sign)
*  $T   Current time
  $D   Current date
>  $P   Current drive and path
  $V   Windows version number
4  $N   Current drive
  $G   > (greater-than sign)
,  $L   < (less-than sign)
  $B   | (pipe)
y  $H   Backspace (erases previous character)
  $E   Escape code (ASCII code 27)
  $_   Carriage return and linefeed

LType PROMPT without parameters to reset the prompt to the default setting.
GRemoves (deletes) a directory.

RMDIR [drive:]path
RD [drive:]path
2Renames a file/directory or files/directories.

RENAME [drive:][path][directoryname1 | filename1] [directoryname2 | filename2]
REN [drive:][path][directoryname1 | filename1] [directoryname2 | filename2]

HNote that you cannot specify a new drive or path for your destination.
XDisplays, sets, or removes Windows environment variables.

SET [variable=[string]]

  variable  Specifies the environment-variable name.
  string    Specifies a series of characters to assign to the variable.

KType SET without parameters to display the current environment variables.
4Displays or sets the system time.

TIME [time]

Type TIME with no parameters to display the current time setting and a prompt
for a new one.  Press ENTER to keep the same time.
GDisplays the contents of text files.

TYPE [drive:][path]filename

&Displays the Windows version.

Tells Windows whether to verify that your files are written correctly to a


Type VERIFY without a parameter to display the current VERIFY setting.
RDisplays the disk volume label and serial number, if they exist.

VOL [drive:]
[Calls one batch program from another.

CALL [drive:][path]filename [batch-parameters]

r  batch-parameters   Specifies any command-line information required by the
                     batch program.
LRecords comments (remarks) in a batch file or CONFIG.SYS.

REM [comment]
jSuspends processing of a batch program and displays the message:
Press any key to continue....

MDisplays messages, or turns command-echoing on or off.

W  ECHO [message]

Type ECHO without parameters to display the current echo setting.
SLocks a drive, enabling direct disk access for an application.

  LOCK [drive:]
XUnlocks a drive, disabling direct disk access for an application.

  UNLOCK [drive:]
HDirects Windows to a labelled line in a batch program.

GOTO label

  label   Specifies a text string used in the batch program as a label.

You type a label on a line by itself, beginning with a colon.
JChanges the position of replaceable parameters in a batch file.

ZPerforms conditional processing in batch programs.

IF [NOT] ERRORLEVEL number command
FIF [NOT] string1==string2 command
IF [NOT] EXIST filename command

~  NOT               Specifies that Windows should carry out the command only
                    if the condition is false.
  ERRORLEVEL number Specifies a true condition if the last program run returned
                    an exit code equal to or greater than the number specified.
f  command           Specifies the command to carry out if the condition is
j  string1==string2  Specifies a true condition if the specified text strings
g  EXIST filename    Specifies a true condition if the specified filename
wRuns a specified command for each file in a set of files.

FOR %variable IN (set) DO command [command-parameters]

}  %variable  Specifies a replaceable parameter.
  (set)      Specifies a set of one or more files.  Wildcards may be used.
V  command    Specifies the command to carry out for each file.
             Specifies parameters or switches for the specified command.

To use the FOR command in a batch program, specify %%variable instead of
Reserved command name
/Loads a program into the upper memory area.

LOADHIGH [drive:][path]filename [parameters]
LOADHIGH [/L:region1[,minsize1][;region2[,minsize2]...] [/S]]
         [drive:][path]filename [parameters]

            Specifies the region(s) of memory into which to load
            the program.  Region1 specifies the number of the first
            memory region; minsize1 specifies the minimum size, if
            any, for region1.  Region2 and minsize2 specify the
            number and minimum size of the second region, if any.
            You can specify as many regions as you want.

\/S          Shrinks a UMB to its minimum size while the program
            is loading.

            Specifies the location and name of the program.

Zparameters  Specifies any command-line information required by
            the program.
%1.%2 MB free
%1.%2 MB allocated
:                   %1.%2 MB total disk space, %3% in use

%1.%2 MB
Windows 95. [Version 4.00.1111]4s all error messages in memory (requires /P as well).
K  /LOW            Forces COMMAND to keep its resident data in low memory.
J  /Y              Steps through the batch program specified by /C or /K.
?  /C command      Executes the specified command and returns.
I  /K command      Executes the specified command and continues running.

Microsoft(R) Windows 95
   (C)Copyright Microsoft Corp 1981-1996.
parameter combinationInvalid functionFile not foundPath not foundToo many open filesAccess 
denied Invalid handleMemory control blocks destroyedInsufficient memoryInvalid memory block 
addressInvalid EnvironmentInvalid formatInvalid function parameterInvalid